Print

Permissible shaft loads

To preclude mechanical overloading of the shaft and bearing, the overload capacity of the shaft end shall be limited to permissible values.

To quickly select a motor and estimate loads, a simplified load model shall be established (see Fig. 1). Here, the radial load, the axial load, and the distance of the load application point from the front side of the motor are the parameters that the user shall verify when selecting a motor.

For every motor size, a fixed axial load limit shall be pre-defined and the associated radial load limits as a function of the effective distance "a" shall be indicated. The catalog provides the values for the loads on the shaft end (a=L) or on half the mounting length (a=L/2). The information provided applies only for the indicated lengths. If loads engage beyond the shaft end, we recommend that our engineering department perform a separate test.

 

Vereinfachtes Lastmodell. Fa = Axiallast, Fr = Radiallast.

Fig. 1: Simplified load model. Fa = axial load, Fr = radial load.

Scope

Basic recommendations

Tools or other customer components to be installed on the shaft must, at a minimum, meet a balance quality of G6.3 according to DIN ISO 1940-1. In special situations (large tool weight, high speeds), a balance quality of G2.5 or better may be necessary.

The load application point on the shaft should lie as close as possible to the motor since the load carrying capability is highest here. In practice, this means that tools or other components to be mounted by the customer should be clamped on the shaft as close as possible to the motor. In the design phase, this should be considered as early as possible.

 

Type Drawing Shaft end Permissible radial load Axial load Valid up to n
F_per_(a=L) F_per_(a=0,5L) Fa n =
KN 21.05 MS 151 ø14x30 PF 450 N 500 N 200 N 18,000 rpm
KN 22.08 MS 151 ø14x30 PF 350 N 550 N 200 N 18,000 rpm
KN 23.10 MS 151 ø14x30 PF 300 N 400 N 200 N 18,000 rpm
V 30.06 MS 132 ø14x30 PF 500 N 550 N 200 N 18,000 rpm
V 31.09 MS 132 ø14x30 PF 500 N 550 N 200 N 18,000 rpm
KR 35.1 MS 3746 ø14x30 PF 550 N 850 N 300 N 18,000 rpm
KR 35.3 MS 3746 ø14x30 PF 550 N 850 N 300 N 18,000 rpm
KR 35.5 MS 3746 ø14x30 PF 550 N 900 N 300 N 18,000 rpm
KR 35.7 MS 3746 ø14x30 PF 550 N 900 N 300 N 18,000 rpm
KR 35.9 MS 3746 ø14x30 PF 600 N 900 N 300 N 12,000 rpm
KR 35.1 D MS 3772 ø25x50 PF 1100 N 1200 N 300 N 18,000 rpm
KR 35.3 D MS 3772 ø25x50 PF 1000 N 1200 N 300 N 18,000 rpm
KR 35.5 D MS 3772 ø25x50 PF 750 N 1200 N 300 N 18,000 rpm
KR 35.7 D MS 3772 ø25x50 PF 650 N 1000 N 300 N 18,000 rpm
KR 35.9 D MS 3772 ø25x50 PF 500 N 800 N 300 N 12,000 rpm
V 50.09 MS 113 A ø22x50 PF 900 N 1000 N 300 N 18,000 rpm
KN 50.11 MS 170A ø22x50 PF 1100 N 1500 N 300 N 12,000 rpm
KN 51.14 MS 170A ø22x50 PF 850 N 1400 N 300 N 12,000 rpm
KN 52.16 MS 170A ø22x50 PF 750 N 1200 N 300 N 12,000 rpm
KN 50.11 D MS 4046 ø30x68 PF 1100 N 1700 N 300 N 12,000 rpm
KN 51.14 D MS 4046 ø30x68 PF 950 N 1600 N 300 N 12,000 rpm
KN 52.16 D MS 4046 ø30x68 PF 850 N 1400 N 300 N 12,000 rpm
V 60.11 MS 113 B ø22x50 PF 750 N 800 N 400 N 18,000 rpm
V 61.15 MS 113 B ø22x50 PF 750 N 850 N 400 N 18,000 rpm
KN 60.09 MS 170B ø24x50 PF 1100 N 1200 N 400 N 12,000 rpm
KN 61.13 MS 170B ø24x50 PF 1100 N 1200 N 400 N 12,000 rpm
KN 62.18 MS 170B ø24x50 PF 1200 N 1300 N 400 N 12,000 rpm
KN 60.09 D MS 171 ø30x70 PF 1300 N 1900 N 400 N 12,000 rpm
KN 61.13 D MS 171 ø30x70 PF 1300 N 2000 N 400 N 12,000 rpm
KN 62.18 D MS 171 ø30x70 PF 1300 N 2000 N 400 N 12,000 rpm
KC 70.12 MS 652-44 ø35x68 PF 2300 N 2500 N 600 N 9,000 rpm
KC 71.16 MS 652-44 ø35x68 PF 2400 N 2600 N 600 N 9,000 rpm
KC 71.20 MS 652-44 ø35x68 PF 2400 N 2600 N 600 N 9,000 rpm
KC 72.28 MS 652-44 ø35x68 PF 2500 N 2700 N 600 N 9,000 rpm
KC 70.12 D MS 182-5 ø35x70 PF 2400 N 2600 N 600 N 9,000 rpm
KC 71.16 D MS 182-5 ø35x70 PF 2500 N 2800 N 600 N 9,000 rpm
KC 71.20 D MS 182-5 ø35x70 PF 2500 N 2800 N 600 N 9,000 rpm
KC 72.28 D MS 182-5 ø35x70 PF 2500 N 2800 N 600 N 9,000 rpm
K 81.23 MS 630 A397 ø30x81 Flansch 2000 N 2900 N 800 N 6,000 rpm
K 82.27 MS 630 A397 ø30x81 Flansch 1900 N 2700 N 800 N 6,000 rpm
K 83.37 MS 630 A397 ø30x81 Flansch 1800 N 2400 N 800 N 6,000 rpm
K 81.23 D MS 630 A196 ø40x70 PF 2400 N 2600 N 800 N 6,000 rpm
K 82.27 D MS 630 A196 ø40x70 PF 2500 N 2600 N 800 N 6,000 rpm
K 83.37 D MS 630 A196 ø40x70 PF 2500 N 2700 N 800 N 6,000 rpm
K 91.31 MS 630 B130 ø40x93 Flansch 4100 N 5000 N 1000 N 6,000 rpm
K 93.38 MS 630 B130 ø40x93 Flansch 4000 N 5100 N 1000 N 6,000 rpm
K 110.24 MS 3954 ø60x117 Flansch 6400 N 7700 N 1500 N 6,000 rpm
K 111.31 MS 3954 ø60x117 Flansch 6000 N 7900 N 1500 N 6,000 rpm
K 112.38 MS 3954 ø60x117 Flansch 4500 N 8000 N 1500 N 6,000 rpm
K 113.50 MS 3954 ø60x117 Flansch 4200 N 8300 N 1500 N 6,000 rpm
K 140.38 MS 630 D62 ø80x140 Flansch 11600 N 12200 N 2500 N 5,000 rpm
K 141.50 MS 630 D62 ø80x140 Flansch 12000 N 12500 N 2500 N 5,000 rpm
K 160.50 D MS 3503 ø90x200 PF 13200 N 14200 N 4000 N 4,500 rpm
K 162.60 D MS 3503 ø90x200 PF 13500 N 14400 N 4000 N 4,500 rpm
K 200.50 D MS 4452 ø95x210 PF 13200 N 14200 N 4000 N 4,500 rpm
K 202.60 D MS 4452 ø95x210 PF 13400 N 14400 N 4000 N 4,500 rpm